Desmond Insurance Blog
Is optimum and smooth ride your top priority on the road? Check these techniques to insure a better auto experience.
Flip the Axle
The fastest and most manageable way to switch axles is by flipping them. Many autos have an over-slung leaf spring built, which means it sits to the top axle.
Your flip kit allows you to shift the axle location to sit it on the top leaf spring. It’s the easiest route to make a 4-7 inch drop without major or dynamic modifications and drawbacks.
Use Lowering Blocks
The best auto ride experience differs among drivers. In case you got an under-slung axle and feel it’s the best, the cheapest, and fastest, then go for lowering blocks set. Such blocks fit the space between the top spring and bottom axle. You or the auto maintenance can install such within a few minutes for each slide.
However, moving axles that go away from one another may cause twisted springs like an S-shape. It can bend straight up or down. As you will see, it can make a significant change in your axle angle and hop. Still, it will depend on your preference.
Choose Flatter Springs
Auto manufacturers provide leaf springs to the particular downward-face arch amount and built. Such springs with lesser arch lower your car, but you have to use a stiffer spring to lessen inversion odds.
It can be challenging if you lower the auto for handling, but it can make your ride more challenging and smoother.
Relocate the Mounts
Once you relocate the shackle and spring mounts, you can lower the auto while enhancing ride comfort, as well as handling. For your specific spring and chassis configuration, it can mean some more than the new set holes drill through the bolts.
Not that you want to, but in the worst case, you may have to notch your auto frame to clear shackles and springs. Then, you’ll have to work on new sets of plates to correct the angle.
Suppose you want to identify the shackle angle and mounting, draw a line from the spring eye rear to the front. Then, the line will have to point to the transmission shaft directly. Its advantage includes roller-center increase and reduced body roll effect while handling the vehicle.
Combining the Approaches
You may get a better and smoother auto ride if you combine the things above. Don’t hesitate to have flatter springs when the vehicles do not get near inversion under extreme circumstances. More, lowering blocks are useful if you keep them 1-1.5” or so. Relocating mounts and more will also depend on you. Remember to balance your preference and purpose for your ride.
Do you want to have smooth and secure rides without worries? Get auto insurance from your reliable agency to experience it.
At Desmond Insurance, we do our best to ensure that our clients are well-protected with affordable and comprehensive policies. We make sure to go the extra mile to help you with your needs. To learn more about how we can help you, please contact our agency at (859) 491-5100 or Click Here to request a free quote.